Rebar Bending Machine

Approx. Rs 63,000 / PieceGet Latest Price

Product Details:

A heavy-duty portable rebar bender is capable of executing rebar bends accurately without damaging the strength of the metal rods. This strong electrical-mechanical bender has two preset angle locks for repeating the same angle bend. They are easy to use and carry. They are applied in reinforced-concrete construction which can bend rebars in angles based on the design needs. Portable benders can bend different sizes and grades of rebar. Latest models This strong electrical-mechanical bender has two preset angle locks for repeating the same angle bend

Approx. Rs 68,000 / PieceGet Latest Price

Product Details:

Rk impex automatic bar bending machines offered by us are designed to bend the bar up-to 6mm to 42mm. These bar bending nachine are served in the capacity of 4. 5kw/6hp power.  

advantage:

1. Column and spool adopt high quality alloy steel, high temperature quenching treatment, higher hardness, more wear- resisting.

2. Inccrease heavy of disc and square steel, never deformation, bend bar more accurately.

Approx. Rs 82,000 / PieceGet Latest Price

Product Details:

Automatic bar bending machines offered by us are designed to bend the bar up to 6mm to 32mm. these bar bending machine are served in the capacity of 4kw/ 5hp power . these machines are high on demand for construction job site. 

Approx. Rs 63,000 / PieceGet Latest Price

Product Details:

Bar bending macine reduce labor cost and low maintenance. special tool steel cutting blades are carfully heat treated for a longer cutting life. clutch system is provided for safety purpose. 

Approx. Rs 70,000 / PieceGet Latest Price

Product Details:

We can undertake order for supply of Universal bar bending machine at resaonable price. These are available in stock and can bend all kinds of steel rods. 

Approx. Rs 70,000 / PieceGet Latest Price

Product Details:

A circular plate bends the bar using this gearbox. It can usually bend bars in the range of 6 mm to 32 mm. The auto reverse and auto forward mechanism is also powered by an electrical system that consists of a contactor and limit switch. The bar can be readjusted due to the spring back effect.

A bar bending machine is made up of the following parts, that are visible to its user:

1. Moving bending roller (This roller basically pushes the bar in the bending direction. It has normally diameter less than the central roller. It rotates around the central roller)
2. Center roller (This is the roller, around which the bar rotates. It itself remains stationary. It is usually made of aluminum or steel with a very high strength grade. Usually, its surface is also lubricated to aid in the bar bending process)
3. Adjustable stopper
4. Pilot lamp (This light lamp indicates that power is being supplied to the machine)
5. Main switch
6. Angle setter (dial type or there is a circular disc with holes all around its circumference. You can either set the angle by a dial or put a pin in the respective hole. Note that each hole usually represents an angle. Normally there is the only option available for the angle setter)
7. Operation button On/Off
8. Angle stopper (Left & Right)
9. Emergency stop button
10. Plug-in for foot switch or some other switching on mechanism.
11. Roller set
12. Foot Operated Switch (Usually it is a button which when pushed by your feet starts the machine’s operation).

How To Operate It

1. The correct rollers should be selected and set for the bars to be bent.
2. Connect the electrical power cord to an appropriate outlet
3. Place the bar between the center roller and the bending roller on the machine surface.
4. Make sure the bar is parallel to the front edge of the machine by adjusting the stopper.
5. The pilot lamp should be lit when the main switch is turned on.
6. Make a test bend and set the angle. Adjust the angle setter slightly right or left if the bent angle is not exactly right.
   • Adjusting and presetting the angle:

For example, if you wish to make a stirrup, which have normally 4 bends at 90 and 2 bends at 135 degrees, you can preset the angles.

• Set the angle setter to 135°, then tighten the right angle stopper to lock the angle.
• Position the angle setter at 90°, then tighten the left angle stopper to lock it in place
• Set the angle setter to 135 degrees. Press the operation button to make your first bend.
• Set the angle setter to 90 degrees and slide the rebar to the desired length. Press the operation button to complete the second bend.

1. Duplicate the same angle each time by locking in the angle stoppers.
2. Activate the foot switch or operation button.
3. When the bend has been completed, the moving bending roller returns to the start position.
4. If the machine has to be stopped in an emergency, press the emergency stop button or release your foot from the foot operated switch. When the roller returns to its original position, the machine will automatically restart.

Approx. Rs 80,000 / SetGet Latest Price

Product Details:

Rebar bending machines are usually used for accuracy of bending angles. The machine is suitable for bending wide varieties of steel bars, TMT, and reinforcement bars etc used in construction. It is capable of bending the toughest rebars and its application is very extensive.

How Does It Works:

1. Moving bending roller (This roller basically pushes the bar in the bending direction. It has normally diameter less than the central roller. It rotates around the central roller)
2. Center roller (This is the roller, around which the bar rotates. It itself remains stationary. It is usually made of aluminum or steel with a very high strength grade. Usually, its surface is also lubricated to aid in the bar bending process)
3. Adjustable stopper
4. Pilot lamp (This light lamp indicates that power is being supplied to the machine)
5. Main switch
6. Angle setter (dial type or there is a circular disc with holes all around its circumference. You can either set the angle by a dial or put a pin in the respective hole. Note that each hole usually represents an angle. Normally there is the only option available for the angle setter)
7. Operation button On/Off

Approx. Rs 1.04 Lakh / PieceGet Latest Price

Product Details:

These machines are high on demand for construction job site applications . the range of bar bending machines we offer renders smooth functioning for longer time period. in addition, the high performance of our reinforced bar bending machine with working rotation speed. 

Approx. Rs 1.22 Lakh / SetGet Latest Price

Product Details:

RK IMPEX mechanical bending machines are rigid in structure, heavy duty, longer life having various models to suit customer's requirement of bending TMT bars from 6 mm dia up to 42 mm dia.

Approx. Rs 78,000 / PieceGet Latest Price

Product Details:

The latest automatic rebar bender cones attached with the servo system can automatically accomplish rebar feeding, straightening, bending and cutting working. The machine could continuously bend various stirrup figures and is used to produce rebar hook and stirrup products in construction, bridge, high-speed road and rebar fabricate plants. The machine is used for straightening and bending TMT bars used on construction projects. It can automatically complete the straightening, sizing, bending, cutting, and other processes. The end products can be any size and shape as per customer requirement and the production quantity also can be set.